RF Shielded Test Enclosure — Benchtop — JRE 0709-LAN
Pre-configured JRE 0709 with a LAN-1 filtered 10/100/1000 Ethernet interface and 2 SMA bulkheads.
JRE 0709-LAN specifications
- Inside dimensions
- 3.25" H x 6.0" W x 8.5" D (90 x 150 x 215 mm)
- Outside dimensions
- 4.5" H x 7.25" W x 9.75" D (115 x 185 x 250 mm)
- Isolation
- −100 dB DC to 1 GHz, −95 dB to 3 GHz, −85 dB to 6 GHz
- Weight
- 5 lbs 2.3 kg
- Shipping Weight
- 6 lbs 2.7 kg
- Shipping Dimensions
- 13" x 10" x 9" (330mm x 255mm x 230mm)
- RF Feedthru
- 2 each of SMA female bulkheads
- RF Filtered Interface
- One JRE LAN-1 Ethernet 10/100/1000 Filtered interface
- Connector Covers
- Dust cover caps with tether chains included for all RF connectors
- RF Absorbing Foam
- 1/2" (13 mm) thick, temperature rating 90 degrees Celsius, UL 94V-0 flammability rating
- Door Hinge
- Heavy duty stainless steel friction hinge
- Construction
- Rugged welded aluminum
JRE 0709-LAN overview
An Ethernet-connected DUT small enough for the 0709 footprint still needs its wired path carried through the shield wall. The JRE 0709-LAN installs that network interface from the start, and I recommend it when the link requirement is settled before the enclosure is configured.
- LAN-1 low-pass filtered interface carries 10/100/1000 Ethernet through the shield wall.
- Interior measures 3.25" H x 6.0" W x 8.5" D (90 x 150 x 215 mm).
- Isolation is −100 dB from DC to 1 GHz, −95 dB to 3 GHz, and −85 dB to 6 GHz.
- 2 SMA female bulkheads provide RF feedthroughs, with tethered dust caps included.
- 1/2" (13 mm) RF absorbing foam helps control internal reflections and hot-spots.
- Welded aluminum construction and a heavy-duty stainless steel friction hinge suit regular lab handling.
The JRE 0709-LAN is $1,100.00 and in stock. Size the connected assembly, not only the device body, against the interior, allowing room for cable exits and adapters. Move to a larger enclosure when that complete setup, or a paired transmitter and receiver, cannot sit comfortably inside.
Go deeper
- How to Select and Configure an RF Shielded Test Enclosure A practical engineer's guide to sizing an RF test enclosure, configuring I/O plates, choosing filtered data interfaces, power, thermal, and antennas.
- Keeping Your Cool: Heat, Vents, Fans and Airflow in an RF Shielded Test Enclosure Why RF shielded chambers heat up, how to measure real device wattage instead of the label, and how much airflow it takes to hold your temperature rise.
- Mounting Devices Inside an RF Shielded Test Enclosure How to hold your DUT inside a JRE chamber for repeatable RF tests: the removable ABS floor, why plastic not metal, antenna placement and wall drilling.
Pre-Configured Enclosures nearest the JRE 0709-LAN
Tell us what connections your device needs.
Tell us what connections you need to your device under test — USB, Ethernet, RS-232, RF connectors, etc. We'll spec it out with you. No cart, no checkout: you send an inquiry and we quote it.
Ask an Engineer