Dual RF Shielded Test Enclosure — Rack-mount — JRE 0814-2R
Dual independent rack-mount chambers, each with a 9.5" H x 6.5" W x 12.5" D interior and field-changeable C-size plate.
JRE 0814-2R specifications
- Inside dimensions
- 9.5" H x 6.5" W x 12.5" D (240 x 165 x 320 mm)
- Outside dimensions
- 11" H x 8" W x 14" D (280 x 205 x 355 mm)
- Isolation
- −100 dB DC to 1 GHz, −95 dB to 3 GHz, −85 dB to 6 GHz
- Weight
- 34 lbs (15.5 kg)
- Shipping Weight
- 41 lbs (18.7 kg)
- Shipping Dimensions
- 23" x 22" x 18" (585 x 560 x 460 mm)
- I/O Plate Size
- C-size (7" x 7", 180 x 180 mm)
- RF Absorbing Foam
- LS-30, 3/4" (19 mm) thick, temp rating 90°C, UL 94V-0 flammability rating
- Construction
- Rugged welded aluminum
- Rack Mount
- Standard 19" rack mount
- Chambers
- 2 fully independent chambers
- Door
- Side-swing door with secure latch handle and stainless steel friction hinges
- Vents
- Two shielded honeycomb vents per enclosure
- Optional MW Upgrade
- Extends isolation to 28 GHz for 5G FR2, UWB, and Wi-Fi 6E/7
JRE 0814-2R overview
A transmitter and receiver do not have to share one RF environment or consume separate rack positions. The dual-bay version places two fully independent upright chambers side by side, each with its own door, plate, ventilation, and sealed test space. It can also run separate DUTs in parallel when throughput matters.
- Each chamber provides 9.5" H x 6.5" W x 12.5" D (240 x 165 x 320 mm) inside.
- Two independent chambers occupy a standard 19" rack mount.
- −100 dB isolation from DC to 1 GHz, −95 dB to 3 GHz, and −85 dB to 6 GHz.
- Optional MW upgrade extends isolation to 28 GHz at greater than 85 dB.
- One field-changeable C-size I/O plate per chamber, each 7" x 7" (180 x 180 mm).
- Two shielded honeycomb vents per enclosure provide passive airflow, with optional fans available.
- 34 lbs (15.5 kg), built from rugged welded aluminum.
- $2,690.00 and in stock; connectors and interface filters are selected separately.
This format earns its rack space when both bays have a defined job, whether that is a link setup or parallel device handling. I would give each field-changeable plate the I/O configuration its own setup requires. The dual-bay format makes sense when both independent test spaces will be used.
Go deeper
- How to Select and Configure an RF Shielded Test Enclosure A practical engineer's guide to sizing an RF test enclosure, configuring I/O plates, choosing filtered data interfaces, power, thermal, and antennas.
- Keeping Your Cool: Heat, Vents, Fans and Airflow in an RF Shielded Test Enclosure Why RF shielded chambers heat up, how to measure real device wattage instead of the label, and how much airflow it takes to hold your temperature rise.
- Mounting Devices Inside an RF Shielded Test Enclosure How to hold your DUT inside a JRE chamber for repeatable RF tests: the removable ABS floor, why plastic not metal, antenna placement and wall drilling.
Enclosures nearest the JRE 0814-2R
Tell us what connections your device needs.
Tell us what connections you need to your device under test — USB, Ethernet, RS-232, RF connectors, etc. We'll spec it out with you. No cart, no checkout: you send an inquiry and we quote it.
Ask an Engineer